Showing posts with label sourdough starter. Show all posts
Showing posts with label sourdough starter. Show all posts

Sunday, October 23, 2011

Sourdough Starter Maintenance

Two Methods for Feeding and Maintaining an Established Starter:

At room temperature...

Unless your kitchen has huge temperature swings that make you feel like you're experiencing all of the seasons on any given day, room temperature counters provide a nice cozy spot for sourdough bacteria to grow.

However, choosing this method also requires that your sourdough starter be fed everyday. (Don't worry, if for some reason you miss a feeding, just pick up where you left off. Miss more than one day? I would start over, but that's me.)

When you are on a daily feeding schedule you need to stir the starter well and discard all but about 1/2 cup (4 oz weighed). To the remaining 1/2 cup (4 oz) add 1/2 cup warm water (8 oz of 80 degree F water) and 1 cup (8 oz) unbleached all-purpose flour.

When preparing to bake with the starter, the day before bake day feed the starter twice - at least 6 hours between feedings.

Then on bake day, feed the starter once at least 6 hours prior to baking.

Feed the remaining starter to continue your sourdough starter on the desired maintenance schedule.

In the fridge...

Plan on feeding the starter at least once a week.

Prior to feeding, pull the starter out of the fridge at least two hours prior to ensure the starter has time to come to room temperature.

If you are only feeding the starter - and not planning on baking yet - discard all but 1/2 cup (4 oz) and add 1 cup (8 oz) water and 2 cups (16 oz) unbleached all-purpose flour. Mix until smooth and cover, allowing the mix to remain at room temperature at least two hours before returning it to the fridge.

Wanna bake some bread??

3 days before you want to bake, take the starter out of the fridge to reactivate. Allow the starter to come to room temperature and plan on:

* day 1 - feed once, 1/2 cup (4 oz) warm water & 1 cup (8 oz) AP flour
* day 2 - feed twice - at least 6 hours apart, 1/2 cup (4 oz) warm water & 1 cup (8 oz) AP flour both times
* day 3 - feed once - 6 hours prior to baking, 1/2 cup (4 oz) warm water & 1 cup (8 oz) AP flour

Create Your Own Sourdough Starter:




Baking Sourdough Bread:






Baking the Sourdough Bread

For the past week my sourdough starter has been in the maintenance phase. I elected to try the refrigerator method, mostly because it meant less feeding and less flour used.

Knowing me, I would get busy and forget to feed it and then I would have to start all over. Sure, you can skip a day...but beyond that...it's really not recommended.

So Thursday, I pulled the starter out of the fridge to reactivate the growth process.

Using this method, day 3 would now be the bread baking day.

Today - was baking day at my house.

Early this morning (around 7 a.m.) I fed the starter, by discarding half and mixing 1/2 cup 80 degree F water and 1 cup all-purpose flour to the remaining starter. According to my book, it should be ready in about 6 hours.

Time to get ready for church.

After breakfast, church, shopping, and lunch - it was time to start the baking process.

**Using a scale, measure out 16 oz of the ready starter to bake bread. Feed the remaining starter 1 cup 80 degree F water and 2 cups of all-purpose flour and let sit covered on the counter for 2 hours (if using the refrigerator maintenance method) before returning it to the fridge.



Ingredients:

5 cups (1 lb 5 oz) all-purpose bread flour
2/3 cup whole wheat flour
1 3/4 cup (14 oz) water
2 1/2 cups (16 oz) ripe starter
2 1/2 tsp salt


* Begin by mixing the ripe starter with the warm water. Hand mixing is recommended, but I use my stand mixer. I like the way it mixes better.

* Add the all-purpose and wheat flours a cup at a time until a well mixed soft ball is formed.

* Cover dough and let rest for 20 minutes.

* Next, add salt to dough ball and mix until dough is soft, well-formed and slightly sticky to the touch.

* Cover dough, and let rest for one hour.

* Uncover dough, flour lightly the dough ball in the bowl before turning it out onto a lightly floured surface for folding. Be careful not to add too much flour, as it will be incorporated into the dough ball.

* Time to fold the dough. Pat the dough ball into a square and then begin folding the square, bringing the top to the middle and then the bottom over the top. Turn the folded dough 90 degrees and repeat this process, gently pressing out the air pockets.

* As dough begins to tighten up, it is time to place the dough back into the bowl, seam side down to rest - covered - for another hour.

* Next, divide the dough. The original recipe I was working with called for the dough to be separated into two large balls. I separate my dough into 2 balls first, one for a regular size loaf pan...and then the 2nd ball into four smaller balls to form mini-loaves.

* In shaping the dough balls, bring the edges together so that all the corners meet in the middle. I use both hands to work the dough in a continuous motion until the dough begins to feel slightly tight. At that point, I put the shaped balls into my prepared (cooking spray) loaf stones to rest for another hour, covered.

* To bake the bread, the oven needs to be preheated to 450 degrees F. It is helpful to use a spray bottle to spritz the loaves with water while they are baking. This will improve the look and texture of the crust.

* Now to bake. If desired, score the top of the dough with a knife or razor before putting in the oven.

* I set the timer for 10 minutes, to spritz the crust with water and monitor the internal bread temperature. When the core temperature reaches 200 degrees F, it is finished baking. The baking process for the loaf size I bake ranges from 30-45 minutes.

* Once out of the oven, it is important to let the bread rest and cool. Because I use cooking stones, it is important to remove the bread from the stones to prevent the residual heat of the stones from further cooking the crust. The longer the bread sits in the stones, the harder it will become.

* Now we have fresh sourdough bread for our family to enjoy. The trick is of course...not eating it as fast as it is baked. Hot, freshly baked bread is incredibly delicious.

Especially with butter!!

Thursday, October 13, 2011

Create Your Own Sourdough Starter

Hints Before you Begin -

- use a rubber spatula when mixing, will make this a lot easier
- measure, weigh, measure, use a thermometer...super important
- make sure your container is big enough to hold the starter, it's gonna grow so bigger is better
- take it from me, it is easier to just take the lid OFF the trashcan before discarding the throw away portion than it is to try to clean it up off the lid...floor...cabinet...whatever...
- have fun!! Get your kids involved, make it a family experiment!

Day 1:

1/2 cup (4 oz) 80 degree F water
3/4 cup (3 1/2 oz) whole rye flour
1/8 tsp molasses


Mix ingredients thoroughly in a nonreactive container that has a lid and the opening is large enough to add and remove starter as needed. The container should be 2-4 quarts in size...I use a gallon size Rubbermaid plastic canister with a square top/opening.

Once mixed, cover tightly with lid and allow to rest for 24 hours.

Day 2:

Throw 1/2 the starter away and add:

1/2 cup (4 oz) 80 degree water
3/4 cup (3 1/2 oz) whole rye flour


Mix thoroughly, cover, and allow mixture to rest (ferment) for 24 hours.




Day 3, 4, 5 & 6:

By now the mixture should be beginning to bubble. Lots of bubbles mean good fermentation, and starter that has visible creases shows signs that it has recently fallen - also a good sign.

Again, throw away 1/2 the starter mix.

Add to the remaining mix:

1/2 cup (4 oz) 80 degree F water
1 cup Unbleached All-Purpose flour


8 hours later, repeat.

**If you miss a scheduled feeding, it's okay! Just continue the schedule of feeding & discarding twice a day on days 2-6.**




Day 7:

Stir the mixture well. Discard all but 4 oz (about 1/2 cup)and put it in a clean 2-4 quart, nonreactive, wide-mouthed container and add:

1 cup (8 oz) 80 degree F water
2 cups (8 1/2 oz) Unbleached All-Purpose flour


Stir this mixture until it is free of lumps. Cover and all mixture to ferment for 6-8 hours.

Now, the starter should be active and have bubbles that break on the surface. The texture should be somewhat elastic, and is now ready to use, or used to keep your sourdough starter going.

There are two methods...on the counter and in the fridge. We'll come back to that.

Today we are on Day 6 at my house. Bubbles, bubbles, bubbles!! Very Exciting!!